- Newsletter February 2024

Newsletter February 2024

Top


BAWA Hybrid Zoom Meeting February 18th. 2024


The meeting was called to order by Frank Ramsay.

Guests: David Olney and Steven Kirchner.


Program Announcements – Paul Krenitsky

Frank will be the speaker this evening and he will discuss his Breakfast Nook made of Alder

March: Jason Forster will speak about the Tea House his is building
plus the Name Tag Challenge


Later in the yeat we have lots more Challenges comming up, so you can start thig about them.

June: Box Challenge

September: 2x4 Challenge

December: Ornament Challenge


Paul would like to have a volunteer to organize the Toy Workshop.


Our Owl

Jon Kaplan told us that we now have an Owl Labs video concerning device that picks up voices from around the room and has a built-in camera that tracks the voice. It can also show a panorama of the room at the top of the screen. Perfect for our combined Zoom/ In-person meetings.

He reminded us that the $60 annual dues are due. You can pay online or send him a check.

Jon Kaplan thanked everyone who renewed their membership.

Laura Rhodes verified that the Woodworking show at the WoodCraft store will take place from Thursday June 6 to Sunday June 9. Thursday will be setup day. She is working on getting postcards made up, and she has a list of high schools where we can advertise for participants.

Frank announced again that he has to vacate the shop he is in and will be selling power and hand tools, work benches and wood. The wood includes big planks of African Mahogany, Real Mahogany, old growth Cherry, and 5/8 Walnut.

Feb 24th and 25th is the tentative sale date, rain permitting. He has given up on looking for a individual works hog but hoping space to move into.


There was discussion about Denatured Alcohol and how it is no longer available for sale in CA.
If you are using Denatured Alcohol, wear protective gloves and work in a well ventilated space.


Top


Featured Speaker
Frank Ramsay
Design and Build of Breakfast Nook


Frank talked about the breakfast Nook he made a number of years ago for a client.



The client wanted the whole piece to be able to withstand children climbing on it, so he made it heavy enough so no part would tip over if kids decided to make it into a jungle gym.

This was the first time he had used Alder and since then, he has used it a lot.

The Nook includes a table, a moveable bench seat, and two fixed bench seats at right angles to one another that fit into the corner of the room.



Bench


Corner unit under construction


Table base



The fixed benches have backrests at different heights and an 3D curve that joins the two.

You can flip up the bench tops to reveal storage underneath. The benches use frame and panel joinery to create the storage units.

The seat backs are made up of about 40 curved slats that have mortise and tenon joints. That's 80 joints just for the slats. The curve in the slats were rough cut on the band saw and finish cut on the router table.


SOSS barrel hinge

Morimbo Lid Stay


The bench tops uses SOSS barrel hinges for opening and Morimbo Lid Stays that have a "soft close" feature.
When the tops close they come down very slowly, no bang and no crushed fingers

The table top has a Indian Rosewood center that is joined to the outer Alder sections with biscuit joints. The top has a gentle curve on all four sides. The top is held onto the base with "Z" shaped toggles that allow for wood movement.

The unit is finished with wipe-on poly.

Finished Table


(Full presentation: Kitchen Nook)


Top



Show and Tell


Frank Ramsay


Frank showed a slide of the Alder and Rosewood media unit/ TV
he made a few years after the Breakfast Nook


Laura Marshall




Laura brought in the pieces she made to protect her new car
when transporting lumber for woodworking projects.
She used "pool noodles" as cushions.


Burt Rosensweig


Burt showed slides of the radio controlled airplane
he had been working on for the past 10 months.
It is made of balsa and lite ply and will be powered
by an electric motor and lithium polymer battery.


Lloyd Worthington-Levy


Lloyd brought in the double bevel marquetry piece se
he made after taking the class that Bruce Powell held last year.
He used commercial veneer. Lloyd bought a Pegas scroll saw.

Top




Minutes by Burt Rosensweig